Distributor 
Stauff Accumulators
|
|
Distributor |
||||||||||||||||||||||||||
|
Stauff Accumulators |
Home Stauff Accessories Clamps Filters Test Service Contact |
Accumulators & AccessoriesAccumulators provide a means of regulating the performance of a hydraulic system. They are suitable for storing energy under pressure, absorbing hydraulic shock, dampening pump pulsation and flow fluctuations. Bladder or diaphragm accumulators provide excellent gas and fluid separation ensuring dependable performance, maximum efficiency, and long service life. |
 |
Comprehensive choice, Immediate delivery, High quality standard
|
|
Accumulator - Bladder Type |
|
|
Code |
Description |
|
|
STBA-0-011-NBRP6-BB1 |
1.1L ACCUMULATOR, BLADDER TYPE |
|
|
STBA-0-025-NBRP6-BB1 |
2.5L ACCUMULATOR, BLADDER TYPE |
|
|
STBA-0-040-NBRP5-BB1 |
4L ACCUMULATOR, BLADDER TYPE |
|
|
STBA-0-10-NBR-P3-BB1 |
10L ACCUMULATOR, BLADDER TYPE |
|
|
STBA-0-20-NBR-P3-BB1 |
20L ACCUMULATOR, BLADDER TYPE |
|
|
STBA-0-37-NBR-P3-BB1 STBA-0-50-NBR-P3-BB1 |
37L ACCUMULATOR, BLADDER TYPE 50L ACCUMULATOR, BLADDER TYPE |
|
|
STDA-032-NBR-P3-BN1 |
0.32L ACCUMULATOR, DIAPHRAGM TYPE |
|
|
STDA-032-NBR-P3-BN1M |
0.32L ACCUMULATOR,DIAPHRAGM TYPE |
|
|
STDA-050-NBR-P3-BN1 |
0.5L ACCUMULATOR, DIAPHRAGM TYPE |
|
|
STDA-050-NBR-P3-BN1M |
0.5L ACCUMULATOR,DIAPHRAGM TYPE |
|
|
STDA-075-NBR-P3-BN1 |
0.75L ACCUMULATOR, DIAPHRAGM TYPE |
|
|
STDA-075-NBR-P3-BN1M |
0.75L ACCUMULATOR, DIAPHRAGM TYPE |
|
|
STDA-100-NBR-P1-BN1 |
1L ACCUMULATOR, DIAPHRAGM TYPE |
|
|
STDA-100-NBR-P3-BN1M |
1L ACCUMULATOR,DIAPHRAGM TYPE |
|
STASB10M15350A-S12 |
ACCUMULATOR SAFETY BLOCK-NG10 SIZE |
|
STASB20M15350A-S13 |
ACCUMULATOR SAFETY BLOCK-NG20 SIZE |
|
STASB32M15350A-S309 |
ACCUMULATOR SAFETY BLOCK-NG32 SIZE |
|
|
AMP114 |
ACCUMULATOR SADDLE CLAMP - 114MM |
|
AMP170 |
ACCUMULATOR SADDLE CLAMP - 170MM |
|
|
AMP228 |
ACCUMULATOR SADDLE CLAMP - 228MMSD |
|
|
BB120R |
ACCUMULATOR SUPPORT BRACKET - 120MM |
|
|
BB170R |
ACCUMULATOR SUPPORT BRACKET - 170MM |
|
|
STA-CK-1 |
Accumulator Charging Kit |
|
STB-0-011-NBR |
BLADDER ASSEMBLY TO SUIT 1.1L ACCUM. |
|
|
STB-0-025-NBR |
BLADDER ASSEMBLY TO SUIT 2.5L ACCUM. |
|
|
STB-0-040-NBR |
BLADDER ASSEMBLY TO SUIT 4L ACCUM. |
|
|
STB-0-10-NBR |
BLADDER ASSEMBLY TO SUIT 10L ACCUM. |
|
|
STB-0-20-NBR |
BLADDER ASSEMBLY TO SUIT 20L ACCUM. |
|
|
STB-0-37-NBR |
BLADDER ASSEMBLY TO SUIT 37L ACCUM. |
|
|
STB-0-50-NBR |
BLADDER ASSEMBLY TO SUIT 54L ACCUM. |
|
|
STB-0-54-NBR |
BLADDER ASSEMBLY TO SUIT 54L ACCUM. |
|
|
STB-AER-01 |
ANTI EXTRUSION RING |
|
|
STB-AER-02 |
ANTI EXTRUSION RING |
|
|
STB-AER-03 |
ANTI EXTRUSION RING |
Accumulator Charging Kit # STA-CK-1
|
|
To maintain optimum performance in hydraulic systems employing accumulators, it is recommended that the gas pre-charge pressure be checked regularly. A loss in the gas pre-charge pressure will cause a drop in the system efficiency and may cause damage to the accumulator bladder, diaphragm or piston. The charging kit allows hydro-pneumatic accumulators, whether bladder type, diaphragm type or piston type, to be charged with nitrogen to the desired pressure. For this purpose, the kit is connected to a commercially available nitrogen cylinder by a flexible hose. The kit can also be used by technicians to check the current gas pre-charge pressure. The control valve incorporates a pressure gauge to permit direct pressure readings as well as a check valve to prevent back flow in the case of low pressures in the nitrogen cylinder. A manual bleed valve allows excess pressure to be reduced to the desired operating pre-charge level.
|
STA -CK -1 Accumulator Charge Kit Comprising of:
|
SAAPC2156/250 |
Charging/pre - loading/gauge set |
|
SMS20/M ¼-2000AGAS |
Hose assembly - 2m |
|
SAA10143 |
7.8" UNF adaptor |
|
SAA50019 |
0.302 x 32 TPI adaptor |
|
SAA50510 |
¼" ISO 228 adaptor |
|
SAAGAS531 |
Type 50 - ¼" BSPT bottle adaptor |
|
SAA2069 |
Valve |
|
SAA2069T |
Valve tool |
Home | Stauff | Accumulators | Accessories | Clamps | Diagtronics | Fluid Connectors | Filters | Test | Service | Valves | Contact
